INDUSTRY NEWS - Emergency Eyewash & Safety Shower Manufacturer

Current position:

ANSI Z358.1-2014 Explained: The 10-Second Rule, 15-Minute Flush and Tepid Water

The four numbers that decide whether an eyewash station passes inspection - and the three that most plants still get wrong.

View more
Weekly Activation or Annual Inspection? What ANSI Z358.1 Really Requires

Two different obligations, often confused. Here is what the weekly check must prove, what the annual inspection adds, and the log format auditors accept.

View more
EN 15154 vs ANSI Z358.1: Which Eyewash Standard Applies to Your Project

Two standards, two markets, one purchase order. Where EN 15154 and ANSI Z358.1 align, where they diverge, and how to write a specification that survives both.

View more
Why Tepid Water Matters: Scald Risk and the 60-100 F Rule

Too cold and workers cut the flush short. Too hot and the flush causes a burn. The 60-100 F band exists for both reasons - and it is the most commonly failed item.

View more
Freeze Protection for Emergency Showers: Three System Options

A frozen eyewash station is a compliance failure that only reveals itself on the coldest morning of the year. Three ways to prevent it, and what each costs to run.

View more

News