A grounding controller fitted with two clamps instead of one, so a tank and the vehicle carrying it — or two containers being equalised — can be bonded at the same time from a single unit. The terminals sit in a cast aluminium Exd enclosure with a digital display head, and each clamp runs on its own blue coiled cable with a separate ring terminal lead.
Two stainless steel clamps — bond two points at once, for example the tank shell and the truck chassis, instead of moving one clamp between them.
Two blue coiled cables — each clamp has its own recoiling cable and brass gland, so the two runs stay separate and do not tangle.
Two ring terminal leads — separate earth leads with ring lugs for bolting to the earth bar or the frame.
Exd cast-aluminium enclosure — heavy-wall cast housing marked Exd on the lid, keeping the terminals in a sealed box.
Digital display head — a display unit on the lid shows the state without opening the enclosure.
Screw terminals on the clamps — the cable is clamped under a screw terminal on each clamp body, replaceable on site.
| Clamps | Two stainless steel grounding clamps |
| Cables | Two blue coiled cables with brass glands |
| Earth leads | Two leads with ring terminal lugs |
| Enclosure | Cast aluminium Exd housing |
| Display | Digital display head on the lid |
| Use | Two-point bonding of tanks, drums and vehicles |
Tank truck and rail car loading, drum and IBC decanting, solvent transfer between containers, powder handling and paint mixing areas — anywhere two points have to be bonded before product is moved.