Stainless Steel Vertical Eye Wash Station with Grating Pedal Platform and Twin Spray Heads

Stainless Steel Vertical Eye Wash Station with Grating Pedal Platform

A free-standing eye wash station built on a slatted stainless steel grating platform. The platform is hinged and works as the foot pedal: press it and the chain linkage opens the valve, so both hands stay free to hold the eyes open. Twin spray heads sit inside the bowl, and the grating keeps the operator standing clear of the spilled water.

Key Features

• Grating pedal platform — slatted stainless steel platform forms both the standing area and the pedal. Press it to open the valve; the open slots let spill water and grit drain straight through.

• Twin spray heads — two heads inside the bowl give a wide, even flow over both eyes; red and black caps protect the nozzles between uses.

• Chain linkage — a stainless chain connects the platform to the valve, so a light press is enough and the valve closes again when the platform is released.

• Stainless steel bowl and riser — smooth surfaces that resist corrosion and wipe clean easily.

• Bolt-down platform — the grating frame has bolt holes at the corners for fixing to a concrete or steel floor.

• PUSH sign plate — the instruction plate is mounted at the valve end of the side arm, at eye height for the operator.

Specifications

Typical Applications

Machine shops, plating and surface treatment lines, chemical dosing and mixing areas, battery charging rooms, workshops and plant rooms where a fixed eye wash point is needed close to the hazard, and where spill water has to drain away from the operator's feet.