A static discharge post that serves two jobs at once: the operator touches the black ball to discharge the body, and a coiled cable on the side grounds the vehicle chassis before loading starts. Two signs cover both actions — a blue human body sign above and a yellow vehicle sign below — so the sequence is clear at the loading point.
Two signs on one post — a blue sign for the human body and a yellow sign for the vehicle, stacked on the same post so both instructions are read at the same place.
Body discharge ball — black touch ball at the top; the operator rests a hand on it before approaching the vehicle.
Vehicle grounding cable — a black coiled cable hangs on the side of the post, ready to be clipped to the chassis or frame before product is transferred.
Yellow earth lead at the base — the post's own earth cable is coiled at the foot, ready for the run to the earth bar.
Stainless steel post and bolted base — polished tube on a round base plate, bolted down at the loading bay so it stays in position.
Model label on the neck — the post carries its model label below the ball, at the point where the hand goes.
| Type | Human body and vehicle static eliminator post |
| Contact head | Black touch ball for body discharge |
| Vehicle cable | Black coiled cable on the side of the post |
| Sign plates | Blue human body sign and yellow vehicle sign, dual signage |
| Earth lead | Yellow cable coiled at the base |
| Body | Polished stainless steel tube |
| Base | Round base plate, bolted to floor |
| Installation | Floor mounted at loading point |
Tank truck and rail car loading bays, fuel depots and gas stations, chemical drum and IBC loading points, paint and solvent transfer areas, and any loading position where both the person and the vehicle have to be discharged before product is moved.